How much diesel can be produced from 1kg plastic?

How much diesel can be produced from 1kg plastic? For ordinary plastics, such as PP PE PS, you can get about 0.7 liters of diesel from every kilogram waste plastic by plastic to oil conversion machine and pyrolysis oil distillation machine. For hard plastics such as ABS, the oil output rate of diesel from waste plastic is about 30%. The following table shows the oil yield of different types of plastics. Here oil yield refers to the crude oil obtained from the raw material. Further treatment is required from crude oil to diesel oil, and the general conversion rate is between 85% and 95%.

The crude oil output rate of different raw materials

What affected the oil yield, the answers is the type, humidity and purity of waste plastics. PP PE PS is the best type waste plastic with high oil yield. And if the plastic with other waste, the oil yield will be low, and if the plastic with too much moisture, the oil yield is not high neither. Even so, mixed plastic from landfill will also achieve around 30% - 40% oil yield, which is good recovery in profit. Here is the diesel from waste plastic in our Colombia’s factory.

Plastic to diesel project in Colombia

In this project case, the Colombian customer ordered one set 10TPD plastic to oil conversion machine and one set 5TPD pyrolysis oil distillation machine. Through the perfect combination of two sets of equipment, diesel oil was successfully produced from waste plastics. Of course, the materials that our plastic to oil conversion machine can handle also include waste rubber and waste tires. If you have these materials, you can also use the plastic to oil conversion machine to handle.

Waste plastic pyrolysis plant and pyrolysis oil distillation machine

DOING company has more than 10 years of experience in the production and manufacturing of plastic to oil conversion machine and pyrolysis oil distillation machine and has mature manufacturing technologies and processes. At the same time, we provide pre-sale, sale, after sale three stages of seamless specially-assigned guidance services. Customers also do not have to worry about after-sales equipment installation and worker training.

DOING company and factory

Customer satisfaction is our biggest driving force. We sincerely look forward to cooperating with you.